Project Update: A Sustainable Family Lake House

OPTI_Brtltt-(5) This energy-efficient lakeside home is designed for an extended family who has been vacationing in New England for generations. The home combines the rustic charm of a New Hampshire cottage with cutting-edge building technology and sustainability.

At around 3,100 sf, the design requirements were to blend in with the existing Lake House vernacular of the neighborhood and the heavily wooded lot, frame views of the surroundings from inside the house, and fit into the lakeside cottage community in scale, proportion and style. Nestled into trees (carefully preserved during construction), the wood shingle home has a roomy screened-in porch and built-in BBQ—a lake retreat must. The colors and textures of materials reflect the laid-back community and surroundings.

lake house elevations The home’s vaulted timber frame and prominent stone fireplace lend a rustic lodge feel, yet remains intimate and cozy. The building has an advanced thermal envelope using prefabricated structural panels, sealed with gasket and tape technology for superior airtightness, moisture control and indoor air quality.

OPTI_BRTLTA2A folding glass wall opens the main living areas to the screened in porch, with lake views and an outdoor gas fireplace and cooking/dining area. One of the three, second-floor bedrooms is a spacious bunkroom accommodating eight or more—all are open to the living/dining area below via a shuttered gallery, retaining the theme of an open gathering space. The kitchen, dining, alcove seating area and great room all have views of the gas-burning, fieldstone fireplace.

Sustainable Building Features:
-Programmable bath fans.
-Multi-zone radiant heating.
-High-efficiency Low E windows.
-Eco-friendly dense-pack cellulose insulation providing R-Values of 35 in the walls and R-44 in the roof.
-No mechanical air conditioning—ceiling fans, window placement and stack effect design provide natural cooling.
-A timber frame constructed of sustainably harvested timbers salvaged from fire or insect-damaged forests.

This slideshow requires JavaScript.

 

Unity Homes Style Series: The Versatile Värm

unity homes varm modern

All Unity Homes have been optimized for health, comfort, energy efficiency and durability. But among the four Unity platforms, Värm™, with its full two stories, has special attributes when it comes to the range of style and configuration possibilities.

In Sweden, the word “lagom” has deep cultural significance. It doesn’t translate directly in English, but it roughly means “just enough,” or “just right.” Perhaps most notably, it also means “in balance”—not too much, but not too little either. Tedd Benson’s family hails from the central farming region of Sweden known as Värmland and it is from these roots, and from this concept, that Tedd and the Unity Homes design team created Värm.

This slideshow requires JavaScript.

With its simple core volume, library of Open-Built® components, and variety of available finishes, any number of architectural styles can be achieved without the high cost normally associated with custom design. Whether your tastes run towards the classic colonial, the country farmhouse, the barn style, the Adirondack/mountain style or the clean lines of modernist architecture, the Värm core volume is a great place to launch your dreams.

The Värm platform, with its simple, yet spacious volume, is especially suited for clients looking to custom design the look of their three or four-bedroom homes. To emphasize the architectural versatility of the platform, here are exterior views of four very different Värms we’ve built recently…and plans for a fifth we will erect in Greenwich, CT in the spring.

The first, shown here, is a farmhouse style home in southern New Hampshire with a wraparound, screened-in-porch, a connector with an open-timbered porch, and a barn-style garage. The full, two-story home, with its optimized footprint and understated elegance, nestles lightly on the land, perfectly complementing its country setting.

The second Värm in Arlington, MA, has been finished as a barn-style home, with vertical, red-stained, rough-sawn boards, large windows, and louvered sunscreen overhangs, giving the home a simple clean look that is at the same time, both rustic and contemporary. A connector and traditional garage round out the home’s exterior.

As a third Värm example, this mountain-style ski home in Bethel, Maine, offers a robust look with its vertical board and shingle siding. Timber frame elements that support deep shed overhangs announce both the home’s aesthetic and function. The connector, with open-timbered porch entryway, joins the house and garage.

This fourth example is a custom Bensonwood home inspired by the Värm platform, but includes a hip roof, emphasizing its verticality and giving it a majestic quality within a relatively small footprint.

These elevations and floor plan of a home to be built in Connecticut in 2015 demonstrate even more creative possibilities for the Värm.

Regardless of your style preferences, the Unity Homes Värm platform optimizes its function in three different ways. First, with its full-height second floor, Värm maximizes the living space, making it perfectly suited for families with older children, where separation and privacy are often desirable. Second, the Värm maximizes its square footage relative to its footprint on the property, leaving more land for recreation—while its second story can offer more distant views. Perhaps most importantly, Värm maximizes square foot cost by factoring the most expensive elements, the roof and foundation, over greater living space.

Lastly, these Zero Net Energy-ready homes have ample roof surface for photovoltaics (PVs) and, as with all four families of Unity Homes, their energy requirements are minuscule, offering the possibility of true fossil-fuel-free comfort year-round, and a new standard for low energy, high comfort and lagom values.

 

 

Featured Project: A High-Performance Vermont Farmhouse 

An Interview with Bensonwood Client Stephen Ferber

Moving from a cherished mid-nineteenth century farmhouse, why did you decide to build new?
For the past 37 years my wife and I had been living in a 150-year-old Greek revival farmhouse on 40 acres. Retired now and in my mid-sixties, I wanted to downsize somewhat but wasn’t willing to compromise on what I had. Ultimately, three or four things came together in making the decision: First, I wanted to downsize to make it easier on myself. Secondly, I had made a deadline to retire from my job. Third, we wanted to move closer to family and my wife’s work: she works at Lyndon State College. Lastly, I wanted the new energy-efficient home to be a reward for all our hard work.

Why did you decide not to renovate your old house?
Our drafty old house cost $2,400 a year to heat, but that wasn’t the main consideration for building new. I had an energy audit done by the Efficiency Vermont folks, which showed us where the problems were, but I wasn’t willing to compromise the architecture by adding layers of insulating material over architectural features. I didn’t want to see beautiful Vermont granite block covered by insulating board.

This slideshow requires JavaScript.

I know you were anxious to get into your new home as soon as possible. Did that affect your decision in choosing Bensonwood?
To be honest, I would have preferred the overall quicker turn-around that the pre-designed Unity Homes plans offer. We didn’t necessarily need a custom house designed from scratch, but we wanted more customization than Unity Homes could provide, so we went with Bensonwood. During the planning stages, we gave quick answers to questions posed by your architect Chris Adams and project manager Tony Poanessa in order to move the process along. We didn’t want one day lost.

Our old house had sold in four days, much quicker than we thought, but that meant we needed to rent while our new home was being built. Our old 40-acre property was deemed organic, which made it of special interest and why it sold so fast. The Jasper Hill Farm cheese people bought the home and property. Among the many renowned cheeses they produce is the organic Bayley Hazen Blue cheese you find featured on high-end restaurant menus.

So while the design process turned out to take a bit longer than we expected, the construction is going quickly and we should be in by the holidays.

What were your design considerations?
I wanted to start with a clean sheet of paper. I basically wanted to repeat my setup by building a farmhouse with a garage that looked like a barn. In my old house we had a four-bay garage and a large woodworking area. And while I wanted to recapture some of this space, I didn’t want my new house to look like a McMansion, with an enormous looking four-bay garage, that would stick out like a sore thumb in its rural Vermont setting. So we wanted the garage to look like a barn, with red-stained, rough-sawn, vertical siding—to make it look like two buildings with a connector.

In the broader sense, I have a real sense of place. We very much wanted to blend into the local vernacular. The home needed to look like an old New England farmhouse, not Adirondack style with orange stained siding—or modern looking, which might look fine in a lake or mountain setting, but not where we wanted to build. It had to look right in its farm setting. We didn’t want our new neighbors to be upset by what we built.

Given Vermont winters, what were your energy considerations?
Our new house, situated on 23 acres with a nice view, is in the middle of a field, with no trees so there are no shadows. We sited the garage due south, so putting PVs (photovoltaics, aka solar panels) on just one side of its roof will be more than adequate to supply all of the home’s electrical needs. We’re using a heat pump system for space heating and cooling and for hot water, with an ERV (Energy Recovery Ventilator) to recapture energy. I think the whole PV system cost $15,000 after tax credits. We had radiant heat tubing put in, just in case, but I don’t think we’ll really need it. The house, designed for Net Zero performance, is all electric—with the exception of a gas cook top.

What could Bensonwood have done better to improve your experience?
We felt we were flying half blind, not being able to walk through a Bensonwood home at the time, in order to say we like this room in this house, and that room in that house. We were shown many plans and pictures, so we knew the quality, but that’s not the same as actually standing in the home and getting a sense of what it’s like. I’m sure not everyone wants people traipsing through their homes. And I guess it’s not practical to have a model home near your facilities, but that might have helped.

On a related subject, how would you feel about your home being used as an example of state-of-the-art energy efficiency?
Situated where we are, within a mile of Lyndon College, with its degrees in Environmental Science and Sustainability Studies, and our proximity to the Fairbanks Museum & Planetarium, with its meteorological focus (they provide Vermont Public Radio’s Eye on the Sky weather forecasts)—I know there’s going to be a lot of interest in our high-performance home.

“Montage Building” Helps Lake Home Project Meet Deadline

lake house shellWith time running out and their prospective home site building permit deadline fast approaching, a couple from Iowa was in a race against time. The 3,000 SF custom home they wanted to build on a steep, challenging site on a southern Vermont lake had to be designed and substantially completed by mid October 2014—and it was already late February.

To make matters worse, without the building documents in hand the prospects wouldn’t be able to combine their (higher-rate) construction loan with their (lower-rate) mortgage to shorten the former and avoid two closing costs—and besides, they could not close without knowing if they could complete their home before the existing build permit expired.

site prepWith just a little over seven months remaining to build, the couple turned to Bensonwood. They were familiar with another home we built on the same lake, and as long-time fans of the PBS television series, This Old House, they had seen Bensonwood featured on the program and thought our processes might hold the key to streamlining the process.

After two visits to our facilities, the husband put his cards on the table:

“If you can build me the house, I’ll buy the land next week!”

We accepted the challenge. Within a few days the Schematic Design contract was drawn up. Next, architect Randall Walter, landscape designer Tim Calabrese and the owner all met to walk the build site in snowshoes. The landscaper was brought so early because setbacks on the property were so tight, and the property so steep, site work and landscaping would need to be completed first as there would be no room to bring in heavy earth moving equipment once the home was up.

From there, the Bensonwood design and engineering teams finalized plans for the custom home in a few months and detailed construction documents were presented to the lender, who was then able to approve a combined construction and mortgage loan.

wall panel raisingThe home was fabricated off site into panelized assemblies and timber elements concurrent with site prep. Simultaneously with work by our in-house interior designer, Jenny Fulton, project manager Tony Poanessa coordinated the in-house teams, on-site sub contractors and just-in-time deliveries.

With all the pieces in place, the home’s shell was erected within a week’s time in August by our raising crew, headed by job captain Iver Bowen, and site supervisor Mark Williston. The completed home will be ready by October—a little over seven months after the client first visited Bensonwood.Wdnss_cropped_01

Randall Walter summarized, “Normally this process would take 12 to 18 months, but in this case, the stars aligned with the clients, their banks, the subcontractors, our suppliers, our schedule and the weather, so we were able to get everything done remarkably quickly.”

 

Ken Burns and Bensonwood Featured at the 2014 Timber Framers Guild Conference

ken burns and tedd benson

Bensonwood’s Tedd Benson (left) and filmmaker Ken Burns at the 2014 Timber Framers Guild conference.

The Timber Framers Guild held its annual Conference, August 7-10, at Southern New Hampshire University in Manchester, NH, in the heart of timber framing country. In keeping with the conference’s historical track, the renowned documentary film director-producer Ken Burns, known for such acclaimed PBS documentaries as The Civil War, Baseball, Jazz, The War, The National Parks: America’s Best Idea, and Prohibition, was the featured speaker at the Conference.

ken burns barn raising film

A scene from the short film by Ken Burns and Florentine Films’ Evan Barlow on the raising of Ken’s studio barn.

Friends of Burns, Tedd and Christine Benson encouraged him to participate in the conference. A timber frame enthusiast in his own right, Burns hired Bensonwood to build his Florentine Films studio in 2012.

The design and building of this timber frame barn structure is a new barn made to look old, and is the subject of a short film independently produced by one of Burns’ collaborators at Florentine Films, Evan Barlow, which was shown at the conference.

In the film, Tedd talks of the importance of timber frame architecture throughout American history—with its honest and durable aesthetic—and, by implication, the essential message it holds for todays troubled building industry.

Timber framers guild display

Bensonwood’s visiting French Compagnon, Thomas Beauvillain, (top) helps demonstrate classic timber framing techniques.

Bensonwood architect Bill Holtz also appears on camera to describe the collaborative, creative process of working with filmmaker, Ken and his wife, Julie, to build the studio. In the film, Bill describes the timber frame design, with its open space plan, as anchored in history but not limited by it; a point underscored by the interior scenes where traditional and modern elements blend seamlessly together. At one point, in tying the film studio’s design to its function, Bill compares the play of light through the building’s carefully calibrated catwalk balustrade to an early Zoetrope, the 19th century forerunner of the modern motion picture projector.

1239038_10152340274635820_721251112_n

Bensonwood Timber Frame Captain, Dennis Marcom (right), using a vintage mortise cutting tool at the 2014 TFG conference in August.

Bensonwood, a platinum sponsor of the conference, was well represented at the event with its “Who’s Who” of timber framing. In addition to the Bensons and Mr. Holtz, long-time timber frame department head and safety director, Dennis Marcom, presented a company review slideshow and collaborated with a State Department of Labor OSHA representative regarding safety in the workplace.

bensonwood crew at TFG conference 2014

(Left to right. ) Bensonwood architect Bill Holtz, timber framer Dennis Marcom, former Bensonwood engineer Ben Brungraber and Tedd Benson.

Also on hand, former Bensonwood employee and structural timber engineering maverick Ben Brungraber, PH.D., P.E., now of Fire Tower Engineered Timber, served on the Engineering Council Symposium preceding the conference. Ben worked at Bensonwood from 1986-2007, and was instrumental in elevating our engineered timber frames to new levels, proving to building inspectors unfamiliar at the time with modern timber frame engineering the efficacy of his sophisticated compression and tension joinery.

In 1984 Tedd, along with a small group of timber framers, formed the Timber Framers Guild of North America to establish a forum for learning and standards. Christine is currently on the TFG’s board of directors.

ken burns TFG film presentation

Contemporary Polynesian Pool House on the Charles

polynesian pool house

Photo by John Linden

A young couple with children asked Charles Rose Architects to design a “contemporary Polynesian hut” for their property southwest of Boston on the Charles River.

timberframe pool house roof

The design called for indoor and outdoor sitting and dining areas; kitchenette; stainless steel outdoor shower; bath/changing area; 1,500 SF deck with in-ground hot tub; and a fire pit with built-in seating. The architect carved out one corner, creating a covered, but open and airy, outdoor lounging area.

Everyone agreed that the new pool house should be wood construction — primarily to match the look and feel of an earlier project the architects designed for the clients, a wood-clad “play barn” with two large rooms, divided by an outdoor space framing views of an adjacent pond. That’s where Bensonwood came in.

pool house interiors

Photo by John Linden

pool house timberframeOur timbered Douglas fir frame supports an asymmetric hip roof whose peak is pulled off-center so that the pool house subtly connects with the geometry of the existing play barn. Our timberframer C.J. Brehio was the job captain, and did a masterful job executing complex compound joinery. Custom concealed steel connections were also used throughout the building. Western red cedar lends rich, warm hues from exposed beams, custom doors and millwork.

complex compound joineryThe stainless steel shower structure was was a built by Alstead, NH welder and metal sculptor Bob Taylor and has a unique sand blasted finish and unique hardware such as flush mounted tapered screws and a big piano hinge for the door.

Other wood used includes: mahogany for the windows; ipe (pronounced “ee-pay,” aka Brazilian walnut); and bamboo. See more photos on our Houzz page here.​

charles river pool house

Photo by John Linden

On the Boards: Cape Cod Pool House

cape cod pool house

In keeping with this month’s “Everyone into the Pool” theme, here is a charming little pool house we are helping fabricate on Cape Cod.

Designed by Rebecca Elsy Ribeiro of D. Michael Collins, Architects, the energy-efficient building features classic colonial carriage house styling with cupola and a sheltered overhang.

Bensonwood is crafting the timberframe, insulated wall and roof panels, and installing the Marvin Ultimate windows and a Marvin outswing bifold door. The timberframe consists of Douglas fir glulam timbers for the main structure and for the exterior timbers​.

Kenneth Vona Construction, a company that very much shares Bensonwood’s values, will be the builder. KVC is not only one of New England’s oldest and most respected custom builders, it is also one of the greenest.

pool house elevationsTheir ideal six-sided building envelope is one that breathes, insulates against losses, sheds water away for sustainability and remains energy efficient and reusable. Like Bensonwood, KVC believes a commitment to environmental responsibility results in immediate payback and comfort.

timber frame design for cape cod pool houseD. Michael Collins, Architects is a small, but high-quality design firm established in Natick, Massachusetts, in 1987. They specialize in new custom homes, additions and renovations, small scale commercial, institutional and historic restoration projects.

Most of the firm’s projects are located in Massachusetts, but they also have projects in Maine, New Hampshire, Vermont, New York, Colorado, Florida and the Caribbean.

We’ll profile more design-build collaborations with D. Michael Collins, Architects and Kenneth Vona Construction in the months ahead.

Texas Prefab Lake House

austin texas lake house 1 An admitted This Old House fanatic, Matt Risinger had grown up watching the PBS television series when, in 1989, a program aired that would change his life. The Wickwire Barn Series—the second time Bensonwood had appeared on the long running home improvement program— featured Tedd Benson and an old barn being converted to a new house: a project Matt had dreamed of building for himself someday. It became the seminal moment in his decision to become the best builder he could be.

Mette Aamodt AIA and Andrew Plumb AIA

Mette Aamodt, AIA & Andrew Plumb, AIA

Fast forward nearly two-and-a-half decades, and architect Andrew Plumb of award-winning Aamodt / Plumb Architects in Cambridge, Massachusetts, is looking for a builder to help assemble and finish out a highly custom modern timberframe ranch home he designed for a special client he has known for years. The lakeside projectTEXAS PREFAB, expected to approach near Passive House standards, would have an aggressive build schedule of one year, and it needed to come in at a fixed budget—so Andrew knew it had to be done right. His first thought was to call Bensonwood for its expertise in the sustainable fabrication of high performance homes, and his second thought was to call green builder, Matt Risinger, now of Risinger Homes, to say Tedd Benson’s company would be fabricating and installing the home’s shell. With the name “Benson” still fresh in his mind after a quarter century, Matt jumped at the opportunity. The home plan, viewable on the Aamodt / Plumb website, is a interpretation of the Texas Ranch vernacular, with two gabled buildings joined by a light-filled entry hall. Designed for a young family, this prefab home strives to create a relaxed, contemporary feel through the use of natural and reclaimed materials, ample daylighting and a thoughtful relationship to the site.

MATT RISINGER

Austin, Texas green builder Matt Risinger

“We sought to create a warm modern atmosphere through the interplay of simple forms, materials and natural light,” says Plumb. The play of the modern and rustic is achieved through material choices and elemental forms. Japanese (Shou Sugi Ban style) charred wood siding, mesquite and ash flooring, and an oversized FireRock masonry chimney and fireplace add a dramatic touch both inside and out. texas green prefab architects renderingThe light-filled open interior, with its elegant but simple timberframe, richly-finished flooring and high-end fixtures, perfectly complements the striking exterior while framing the surrounding views. Matt Risinger asserts that, “The most sustainable house is a pretty one. Architect-designed houses will be loved and cared for because they are beautiful. Ugly houses will fall into disrepair and be torn down eventually.” fireplaceBeyond the aesthetics, this house was designed to coast through the hot parts of the day with little need for air conditioning. This is achieved through rigorous attention to air sealing and our panelization process using super-insulated walls. All the exterior claddings are installed over a rain-screen air gap. The roof, wood siding and even stucco have an air gap behind them so that the potential for water intrusion over the life of the building is minimized. Risinger installed super-efficient mechanical equipment to make the best possible use of the resources consumed. 95%+ efficiency gas equipment, super high-efficiency AC, Ultra-Aire Split Dehumidifier prevents mold and allows the owners to keep thermostat settings high when the building is unoccupied.YOUTUBE TIMELAPSE IMAGE You can watch Matt Risinger’s YouTube video of the home being assembled here. Once the project is completed and finish photos become available, we will revisit this home to detail its space plan. Stay tuned.

Sunday River Ski Retreat: The Best of All Worlds

Tedford ElevationSome ski homes high on the mountain have beautiful views down the valley. Others near the base lodge typically have great views up the slopes. This timberframe home at The Glades at Ridge Run, a new slopeside residential neighborhood at Sunday River Resort in Newry, Maine, captures both.

Situated in the western mountains of Maine just three hours from Boston, Sunday River Resort has long been one of New England’s most popular four-season playgrounds, but what is so special about the property that owners Meredith and Jamie found here is that it sits uniquely midway up the mountain with expansive views above and below.

Though Meredith and Jamie had just completed an extensive renovation on another home and weren’t anxious to begin a new construction, this was the first time a ski-on, ski-off home opportunity was available at Sunday River, so the couple knew they had to jump on it. They were also motivated to replace an old beloved, but small, ski lodge they had outgrown. Sensitive to the feeling of transplanting their relatives away from a getaway that had been in the family for years, they wanted an open concept floor plan with the feel of a true home. They also wanted to maximize family interaction, and minimize the size of the house to facilitate that function—as well as for aesthetic and environmental impact motives.

sunday river family ski lodge renderingPast renovations had taught Meredith and Jamie to be flexible but decisive, which helped in this first new house project. They also knew from experience that “design by committee” was something to be avoided, rather it was better to create a team dynamic between client and architect that respected roles and responsibilities, but also valued input from all parties. The mutual trust that developed allowed changes to be made fluidly and without conflict.

The Bensonwood design team of Randall Walter, Curtis Fanti and Dave Levasseur, all avid skiers in their own right, were excited to create this special place from a perspective of years spent skiing and snowboarding. Their personal insights proved invaluable in informing practical aspects of the design.

The architectural review process at the resort and the corresponding design standards requires development that complements the surrounding natural setting; minimizing the impact on the landscape while allowing for individual freedom of design to suit the needs of each homeowner. A common theme, described as a Northeast Cottage with Adirondack and Shingle Style influences, dictates the use of building materials, colors, landscaping and building style at the resort. The style is best illustrated in Summer Cottages in the White Mountains by Bryant F. Tolles, Jr. (2000), in which the use of native materials blended with natural colors provides an effective link to both the local environment and the great cottage architecture of the early 20th century.

Sunday river ski lodgeWorking closely with the clients, the resort, the civil engineering firm Main-Land Development Consultants, Inc., and the town zoning board, Randall was able to design the energy-efficient home into a challenging site with steep terrain and protected wetlands. He was able to navigate the regulations and arrive at the design—a traditional Adirondack timber lodge style with a modern twist on the gables to accommodate the views—in a way that pleased all the parties involved. In the end, the review board process was easy and the owners got a home that fit their needs and respectfully fit the mountain landscape.

Another welcome test for Bensonwood is the truncated construction timeline. With designs finalized this past spring, the owners wanted to ski from the home this coming winter. Anxious to prove that even a custom 3,900 SF mountain home on an undeveloped site could go up in record time with our Open-Built® systems and offsite fabrication, the Bensonwood team embraced the challenge. Rapid onsite assembly will also help cut build times in half over conventional construction, effectively giving the homeowners an entire extra season to enjoy the resort.

ski deckLike many of Bensonwood’s mountain and shore homes, the house features gable roof lines, with one important distinction: these gables, dormers and bump outs will have asymmetric rooflines that permit both mountain and valley vistas as well as views of arriving and departing skiers. These roof angles, along with the heavy, rough sawn, red cedar clapboards, work to give the exterior its distinctive look: at the same time both traditional and contemporary, while the property’s southern exposure allows for plenty of natural daylighting and passive solar gain.

On the inside every detail of the sanctuary, which will accommodate three generations of family, has been strategically planned. The owners wanted to maximize the use of space, and that included the kids’ space on the ground level, with the fun feel of a ski resort locker area. The ground floor has a rustic lumberjack-inspired kids zone, with a mud room off the garage, an open play area, a game room, a guest bedroom, a bunkroom with three beds, and facing his and hers bathrooms.

The first floor has a large open space plan with cathedral ceiling and a gathering area across from the kitchen/pantry and adjacent to the dining area. The dining room will have a long, farmhouse-style table with benches accommodating 10 or more. The second floor plan has three bedroom suites, each with their own bath, and a balcony open to the gathering area below.

sunday river ski lodge renderingPerhaps the most unique feature of the project, however, is a very innovative ski-on, ski-off deck. The custom deck required Randall to create a multi-functional outdoor living space with views up and down the mountain in a style that also satisfied design review board restrictions. His solution was adjust the roof pitch and angles so skiers on the deck will still be able to enjoy the views, as he had done on the main house.

Mindful of the homeowners’ sensitivities to limiting the home’s size, he placed the deck atop the garage so skiers will have easy to the home’s bathrooms and kitchen on the main floor when they ski home at lunchtime. Unique features include a hot tub—not tucked away in a secluded spot as is often seen—but in the open air on the sheltered ski deck so all guests have ready access. There are also ski and snowboard racks, overhead heating elements, a fireplace and a hot tub on the deck.

FLOORPLANOne of the most creative elements of the home is one the clients devised. Rather than the traditional guest book for visitors to sign, the couple will immortalize them with a round timber into which they can carve their names and the dates they stay, creating a family legacy crafted in wood that will last for generations—just like the home.

Architect Randall Walter predicts that, like many vacation homes Bensonwood has crafted over the past 40 years, this house will be used much more than originally intended, because families often discover they enjoy spending time in them so much more than in their primary residence.

 

 

 

Project Update: Orchard Hill Breadworks Pizza Pavilion

orchard hill pizza nightWe are proud to announce that the Orchard Hill Breadworks Pizza Pavilion that Bensonwood volunteers helped build, is now open. A community supported building project dreamed up in the summer of 2013, the Pizza Pavilion is a gathering place to celebrate and share meals. Its primary use is as a place to host benefi10437442_775628855802052_4393911810537717031_nt Pizza Nights throughout the summer.

The pavilion  provides guests shelter and allow pizza night to go on despite the weather. Pizza Night started in 2007 as a small gathering of friends and family, but now attracts hundreds of guests every week of the summer with 100% of profits going to local nonprofit groups.10178060_757302684301336_2476085396725425041_n Orchard Hill Breadworks, a small, rural bakery located in southwest New Hampshire, has given away almost $30,000, $500 to $1,000 at a time to about 20 different groups. Click here to see some of the beneficiaries and visit them on Facebook to keep current.   This time lapse of the project tells a story of collaboration, cooperation and group effort.