Unity Homes Style Series: The Versatile Värm

unity homes varm modern

All Unity Homes have been optimized for health, comfort, energy efficiency and durability. But among the four Unity platforms, Värm™, with its full two stories, has special attributes when it comes to the range of style and configuration possibilities.

In Sweden, the word “lagom” has deep cultural significance. It doesn’t translate directly in English, but it roughly means “just enough,” or “just right.” Perhaps most notably, it also means “in balance”—not too much, but not too little either. Tedd Benson’s family hails from the central farming region of Sweden known as Värmland and it is from these roots, and from this concept, that Tedd and the Unity Homes design team created Värm.

This slideshow requires JavaScript.

With its simple core volume, library of Open-Built® components, and variety of available finishes, any number of architectural styles can be achieved without the high cost normally associated with custom design. Whether your tastes run towards the classic colonial, the country farmhouse, the barn style, the Adirondack/mountain style or the clean lines of modernist architecture, the Värm core volume is a great place to launch your dreams.

The Värm platform, with its simple, yet spacious volume, is especially suited for clients looking to custom design the look of their three or four-bedroom homes. To emphasize the architectural versatility of the platform, here are exterior views of four very different Värms we’ve built recently…and plans for a fifth we will erect in Greenwich, CT in the spring.

The first, shown here, is a farmhouse style home in southern New Hampshire with a wraparound, screened-in-porch, a connector with an open-timbered porch, and a barn-style garage. The full, two-story home, with its optimized footprint and understated elegance, nestles lightly on the land, perfectly complementing its country setting.

The second Värm in Arlington, MA, has been finished as a barn-style home, with vertical, red-stained, rough-sawn boards, large windows, and louvered sunscreen overhangs, giving the home a simple clean look that is at the same time, both rustic and contemporary. A connector and traditional garage round out the home’s exterior.

As a third Värm example, this mountain-style ski home in Bethel, Maine, offers a robust look with its vertical board and shingle siding. Timber frame elements that support deep shed overhangs announce both the home’s aesthetic and function. The connector, with open-timbered porch entryway, joins the house and garage.

This fourth example is a custom Bensonwood home inspired by the Värm platform, but includes a hip roof, emphasizing its verticality and giving it a majestic quality within a relatively small footprint.

These elevations and floor plan of a home to be built in Connecticut in 2015 demonstrate even more creative possibilities for the Värm.

Regardless of your style preferences, the Unity Homes Värm platform optimizes its function in three different ways. First, with its full-height second floor, Värm maximizes the living space, making it perfectly suited for families with older children, where separation and privacy are often desirable. Second, the Värm maximizes its square footage relative to its footprint on the property, leaving more land for recreation—while its second story can offer more distant views. Perhaps most importantly, Värm maximizes square foot cost by factoring the most expensive elements, the roof and foundation, over greater living space.

Lastly, these Zero Net Energy-ready homes have ample roof surface for photovoltaics (PVs) and, as with all four families of Unity Homes, their energy requirements are minuscule, offering the possibility of true fossil-fuel-free comfort year-round, and a new standard for low energy, high comfort and lagom values.

 

 

Unity Homes Celebrates 2nd Anniversary

“The typical American home is a performance dinosaur, and is too much of a long-term burden for homeowners and society. Unity Homes aims to help make this species extinct.”     

Tedd Benson

Governor-2013-16

New Hampshire Governor Maggie Hassan (standing, center) visiting the Unity Homes production facility in October 2013.

On October 9, 2012, Bensonwood launched Unity Homes with the goal of making ultra-efficient, off-site-built homes affordable for the average home buyer. To date, Unity Homes have been built along the East Coast as far south as Asheville, NC and as far north as Montpelier, VT, and have been praised as possibly the “greenest prefabs on the market” by TreeHugger’s Lloyd Alter.

Designed to consume 50 to 75 percent less energy than standard newly-built homes, Unity Homes currently has four distinct 2 to 4 bedroom styles ranging in size from 1,028 to 2,450 sq ft. The home models are the Tradd (a classic tall cape), Xyla (an American bungalow), Värm (a Swedish contemporary) and Zūm (a passive solar optimized modern). All four of the highly-customizable styles have been built.

3 VARM SAMPLES

Three interpretations of the Värm design shown here illustrate the highly-customizable nature of Unity Homes.

In the two years since its launch, Unity Homes has developed ways to raise the quality and performance of sustainably built homes while continuously trimming cost to make them ever more affordable. The company has already reached its original goal of trimming the typical build time to 30-35 working days for most projects and expects to get it down to around 20 working days in the future.

History

Screenshot-2014-10-03-08

Although Unity Homes first appeared in 2012, the seeds of the idea began much earlier. In 1991, Bensonwood began the long-term process of standardizing home production using computer-assisted design (CAD) software to optimize floor plans.

“I have long believed that the average American home should have a much higher standard of build quality, durability and energy performance,” Tedd Benson said in a 2012 Green Building Advisor article about the Unity Homes launch. After years of building a reputation for higher-end timber frame projects, Benson and the Bensonwood team wanted to bring his building innovations to the market-rate factory-built world.

There was also a philosophical element to Benson’s plan, describing the typical American home as a performance dinosaur, and too much of a long-term burden for homeowners and society. Then, as now, he wants to make that species extinct and transform the industry by offering an affordable home at a higher standard of efficiency.

OPT_Unity-House_121508_0195

The LEED Platinum-certified, Net-Zero Energy president’s home at Unity College in Maine.

In 2008, Bensonwood received critical acclaim for its roles in fabricating the LEED Platinum-certified Unity House, a net-zero energy residence built on the campus of Unity College in Maine for the college president and his family.

The project was important, not only because the building was designed to maximize energy performance, but because it highlighted the Passive House standard for airtightness—the most cost-effective and easily achievable aspect of the Passive House standard.

Inspired by the project’s success and what the company learned from it, four years later Bensonwood launched a separate company producing high-performance prefab houses. The company was dubbed Unity Homes because it was thought the perfect name to express the democratic, egalitarian nature of these homes designed for the average American family.

Despite being in the throes of the worst housing crisis since the Great Depression, Benson realized that the company’s Bensonwood’s Open-Built® “operating system” capabilities and production capacity were being underutilized and warranted expansion. Tedd Benson also wanted to avoid reducing staff and a new division would allow the company to weather the housing downturn.

A 40-Year-Old Startup

OPT_shop-work

Building system team members assembling wall sections for an early Unity Home.

Unity Homes’ strategic vision began with a seemingly simple premise. “What if building only took 30 working days, all costs were known, the house quality was above anything the buyer had previously experienced, and the home could be net-zero-energy forever?”

For nearly a year, the entire Bensonwood team worked together to design and engineer the Unity Homes offerings and develop all the information, renderings and floor plans.

early unity college planning session

An early Net-Zero Unity House planning session.

With no outside funding and many long hours, the company created a “40 year old start up,” Tedd Benson quipped at the time. In the end, Unity Homes was able to achieve both energy performance and price point goals with its high-precision panelized construction methods, keeping 60% of construction inside its production facility. Each home is organized into easily accessible “layers,” making for easier future upgrades and repairs.

By the time Benson announced the new company’s launch in an October 9 post on his blog site,The New House Rules,” Unity’s first two homes were already in production.

Montage: A Streamlined Process

OPT_EXPLODED-UNITY

In Montage Building, pre-designed, high-performance elements can be easily reordered to fit homeowner budget, lifestyle or location.

The Unity Homes team sees these houses as more than another entry into the green prefab market, but rather as a complete rethinking of how houses are built. Many people in North America buy houses that might not last as long as they do; Unity houses, like the custom Bensonwood homes, are designed to last for generations.

Additionally, instead of prefab or modular, Tedd Benson prefers the term “montage” to describe the homes, which essentially means “assemble” or bring together disparate elements to form an integrated whole. That use of montage refers not only to the building process where panels are assembled at the home site, but also to a unique approach to vernacular design. The homeowner would not incur the cost of hiring an architect, nor would they be choosing from a limited product line as with most modular or prefab houses, but be allowed a range of customization to fit their lifestyle, budget and location.

Produced in Bensonwood’s Walpole, NH “studio,” the panelized wall, floor and roof assemblies are typically ready to ship to site in a few weeks. This work is concurrent with site prep and in parallel with other component fabrication such as the precision-cut beams and millwork.

The onsite assembly of the weathertight shell is usually accomplished in one to three days, depending on complexity and garage options. From there, Unity Homes can be finished quickly because of the open layout and packaging of systems, such as pre-assembled HVAC modules. While a standard new home takes 150 days to build, Unity Homes can now shave the building cycle down to as little as 30-35 days.

The Unity Homeowner Experience: “Rewarding and Fun”

Tedd Benson has always stressed the importance of owner involvement in the homebuilding process, but J.C. and Nancy Woodward of Fitzwilliam, NH, took it to another level. J.C. and Nancy initially came to Bensonwood looking for a custom home, but after several discussions with associates, architect Chris Adams suggested they consider one of the new Unity Homes about to be launched. The Woodwards were intrigued and chose the Värm style—J.C. also chose to act as general contractor to cut cost.

Varm Unity Home

An early Värm in New Hampshire was finished by the owners to reduce cost.

The site was prepped in late 2012, production began in February 2013, and by April the crew arrived with the home’s shell, which Woodward would finish out himself with help from some local subcontractors. Having built another house 25 years prior, he expected the typical chaotic construction scene with a host of endless problems to address. Because of the obvious attention to detail and quality, Woodward says, any problems that arose were small ones and easily solved.

J.C. was there from 7 a.m. until evening every day and was stunned at how quickly and smoothly the home came together. He was also impressed by how, “every person on the Unity team deeply cared about my project’s success.” From architect Chris Adams “wringing function from every square inch” to make the house feel a lot bigger than its 1,700 SF footprint, to project manager Tony Poanessa repeatedly “going the extra mile” to make the project run smoothly, Woodward describes the experience as rewarding and fun. In fact, he was so inspired he is now taking a CAD drafting course at Keene State College and hopes to work as a project manager himself someday.

High-Performance

The airtight homes possess many of the standards of passive house: optional triple-pane windows, high levels of dense-pack cellulose insulation (R35  OBPlus Walls® and R44 roof), buttoned-up building shells with a Passive House level of airtightness to 0.6 ACH @ 50 Pascals or better, energy recovery ventilators, air-source heat pumps and more to reduce energy use by 50% to 75% compared to standard new houses. The homes’ operational efficiencies with low energy loads mean less power use and smaller HVAC systems. They’re also capable of achieving net-zero energy if the owner decides to add a modest solar electric system.

Health & Comfort

OPT-Unity-House_121508_0043

Stressing health and comfort as much as energy efficiency, Unity Homes are well-lit, quiet, draft free and moisture controlled.

In addition to the energy-saving features, standard specifications of the two- to four-bedroom homes include low-VOC paints and finishes, all-electric water heaters, Moen fixtures, EPA WaterSense toilets from Kohler, and high-quality woodworking and cabinetry.

In addition, they’re comfortable, light-filled and spacious, have great air quality and are fitted with high-quality materials, finishes and fixtures. Another less-considered element is that they are quiet—something too often missing in our homes. Silence is a feature increasingly accepted as vital to health and emotional well-being; and with doors and windows closed there are no traffic sounds from the street, airplanes overhead, barking dogs or noisy neighbors. Tedd Benson often refers to these as providing vital “sanctuaries or “sacred spaces” for family.

Adaptability

Heavily influenced by the thinking of John Habraken and Stewart Brand, Benson and associates developed the Open-Built platform to allow simple modification of structures as occupant needs change. The central idea behind Open-Built is to “disentangle” the building’s interior and exterior systems into separate, functional layers, which improves the efficiency of the construction process. That disentanglement also allows for long-term access, meaning homeowners and professionals can accomplish changes, upgrades and renovations with less demolition and rework.

All systems within the Unity Homes will be continually scalable, with most mechanical and space upgrades able to be accomplished by the homeowners.

Cost

3D FLOOR PLAN MODELING

The ultimate goal of all green prefab manufacturers is to get the quality control and efficiencies possible in a factory at an affordable price. A common complaint is that Unity Homes and its peers are not affordable when compared to conventional stick-built housing, despite the fact that these are not conventional houses.

In truth, cost for this “beyond code” design and performance is competitive with current on-site, building-code-based construction when all factors are considered. These include: resale value, energy bills, maintenance and repairs, health effects and remodeling cost.

Nevertheless, driving down cost is a top priority in the Unity Homes mission. Unity plans to broaden the market for their homes by continually reducing cost to match the cost of conventional building, which varies widely between geographical regions. The company has already achieved this in many areas of the Northeast.

Eventually, Benson says, as more builders use and demand high-performance products, competition will increase among manufacturers, creating a virtuous cycle of improved performance and lower costs. He is emphatic, “Americans deserve better homes, and the industry has the capacity to build them, we’re just not doing it on a consistent basis. If this type of building was industry wide, the costs would drop for everyone.”

Future

OPTI_MEIR-AUER-5June-2013-001Tedd Benson is pretty clear about his future plans for Unity Homes: expanded production facilities across the country to lower shipping costs, continual improvement in the production process, and lower cost.

Eventually, Unity Homes wants to merge its current panelization process with modules that would allow Unity to complete mechanical rooms, bathrooms and kitchens at its facility, and leave only 20% of the building process for on-site construction.

Last, but not least, he wants Unity Homes to stand as a sustainable model for the industry, and with that to change how Americans view homebuilding from something to be dreaded and endured to something that is rewarding and even fun. In the end that will be a source of healing not only for future homeowners but for the planet.

On the Boards: Cape Cod Pool House

cape cod pool house

In keeping with this month’s “Everyone into the Pool” theme, here is a charming little pool house we are helping fabricate on Cape Cod.

Designed by Rebecca Elsy Ribeiro of D. Michael Collins, Architects, the energy-efficient building features classic colonial carriage house styling with cupola and a sheltered overhang.

Bensonwood is crafting the timberframe, insulated wall and roof panels, and installing the Marvin Ultimate windows and a Marvin outswing bifold door. The timberframe consists of Douglas fir glulam timbers for the main structure and for the exterior timbers​.

Kenneth Vona Construction, a company that very much shares Bensonwood’s values, will be the builder. KVC is not only one of New England’s oldest and most respected custom builders, it is also one of the greenest.

pool house elevationsTheir ideal six-sided building envelope is one that breathes, insulates against losses, sheds water away for sustainability and remains energy efficient and reusable. Like Bensonwood, KVC believes a commitment to environmental responsibility results in immediate payback and comfort.

timber frame design for cape cod pool houseD. Michael Collins, Architects is a small, but high-quality design firm established in Natick, Massachusetts, in 1987. They specialize in new custom homes, additions and renovations, small scale commercial, institutional and historic restoration projects.

Most of the firm’s projects are located in Massachusetts, but they also have projects in Maine, New Hampshire, Vermont, New York, Colorado, Florida and the Caribbean.

We’ll profile more design-build collaborations with D. Michael Collins, Architects and Kenneth Vona Construction in the months ahead.

1st evoDOMUS – Bensonwood Project Underway

evodomus rendering

Architect’s Rendering by Alexander Kolbe

When husband and wife architects Alexander and Michelle Kolbe, co-founders of evoDOMUS, a Cleveland-based firm, wanted to design and build high-quality, sustainable homes in the U.S., they went looking for a manufacturing partner who could match the quality of homes they built in Alexander’s native country of Germany.

They sought a montage homebuilding company of the caliber of the venerable Huf Haus and Baufritz, Germany’s leading off-site building companies, which helped establish off-site panelized building as the primary construction methodology throughout Europe. Both companies are more than a century old and, like Bensonwood Unity Homes, combine timber framing influences with advanced design and high-performance building.

However, the Kolbes wanted a more personal connection to the client through the entire process—the level of attention a smaller company could provide—to reduce the stress homeowners often associate with a custom house project, such as designers not tuned-in to their clients’ needs, unreliable contractors, as well as schedule and budget overruns. After thoroughly researching high-quality panelized builders, fabricators and timberframers, the names Tedd Benson and Bensonwood kept popping up. So Alexander got on the phone and, much to his astonishment, Tedd picked up.

Upon hearing of the Kolbes’ high standards and montage building interest, Tedd replied, “That’s exactly what we’re doing!” A meeting with Tedd and project manager Hans Porschitz followed and it was soon apparent that the synergies and shared values of the two companies were aligned. A relationship was established: Bensonwood would fabricate the evoDOMUS home shells.

Now, the first joint project between evoDOMUS and Bensonwood is underway in Fairfield County Connecticut: a 5,000+ SF 4-bedroom Bauhaus-inspired modernist home in the “Cloud” Series of evoDOMUS homes. Strikingly original and family-friendly, Cloud is also inspired by current Mexican and Spanish interpretations of modern residential architecture. Customized to their clients’ needs, the home’s clean lines, contemporary materials and use of advanced building science are all characteristic of evoDOMUS home designs.

evodomus elevation

East & West Elevations

Designing the home for its two-acre site had its challenges; its wooded setting with wetlands, an awkward slope and rock ledges all needed careful  consideration. In addition, the home had to incorporate passive as well as active solar design, requiring precise siting along with design elements such as a south-facing second floor loggia to shade the first floor in summer months.

The Kolbes’ strong focus on sustainability prompted the use of triple-glazed Loewen windows and a Zender Energy Recovery Ventilator, which recovers up to 90% of the energy of the extract air to warm the incoming fresh air, saving on heating costs. The air distribution system then channels the optimally tempered fresh air to individual rooms as needed. The exterior is clad in Resysta siding made of rice husks, common salt and mineral oil, which makes it both environmentally friendly as well as extremely weather resistant against sun, rain, snow or salt water. Resysta siding also requires minimal care and offers the look and feel of wood and can be painted.
evodomus logo

The home has 4,100 SF of living space with 2 stories above grade and a 900 SF finished basement and 924 SF garage. Off the garage are a mud room, a half bath and a yoga fitness room. The first floor has an open great room with living and dining areas adjoining another open space with a kitchen and family room. Rounding out the first floor is a bedroom/study with adjacent bath. The second floor plan includes the master bedroom, three additional bedrooms (each open to a long balcony), a family bath, a study and a laundry room.

evodomus floor plan

First Floor Plan

EvoDOMUS uses low or no VOC paints and finishes in their homes and only formaldehyde-free materials. Material selections consist primarily of products with high-recycle content, as well as FSC certified woods and bamboo.

Alexander and Michelle Kolbe wanted to offer their customers not only the highest quality, sustainable homes available, but an excellent experience as well. By partnering with Bensonwood, evoDOMUS could put its resources into delivering superior design, customer service and care, rather than making investment in fabrication facilities, with financial partners and the loss of control and client interaction that would imply.

By maintaining that control, evoDOMUS is able to fulfill its mission of making homes as beautifully designed and high quality as German cars—with a customer experience to match.

Unity Homes: Indoor Air Quality and Comfort

unity homes kitchenYou can live 21 days without food, 7 days without water, but only a few minutes without air. Every day we take 21,600 breaths; that’s nearly 8 million breaths of air a year. By weight, we take in more air than food: 4,500 times our own weight in an average lifetime.*

On average, we spend 90% of our lives indoors, and approximately 2/3 of that time is spent at home. Today’s health conscious consumers will pay a premium for healthy, natural foods, but often give less thought to indoor air quality or overall healthiness of their homes. A recent McGraw Hill Construction report, “The Drive Toward Healthier Buildings,” finds that most homeowners turn to family, friends or coworkers for advice on home products and practices, with few requesting advice from the builders, remodelers and architects who know most about how these decisions might affect occupant health.

However, homebuyers are increasingly concerned about the Indoor Air Quality (IAQ) of their homes. Pollutants like mold, radon, carbon monoxide and toxic chemicals are receiving greater attention than ever as poor IAQ is linked to a multitude of health issues. Some pollutants cause health problems such as sore eyes, burning in the nose and throat, headaches or fatigue. Other pollutants cause or worsen allergies, respiratory illnesses, heart disease, cancer, and other severe long-term health issues. At high concentrations, pollutants such as carbon monoxide, can be fatal.

Given how important air is to life, let’s examine perhaps the most important attribute of Unity Homes, and properly built high-performance homes in general, which is how they can help you breathe easier and live healthier.

air pohoda ERV

Air Pohoda’s Ultima 240E i-ERV uses an Enthalpy heat exchange core

To start, only low VOC (Volatile Organic Compounds) materials and finishes are used in the construction of Unity highly-insulated, tightly-sealed, energy-efficient homes, resulting in exceptional levels of indoor air quality. Because of their extraordinary air-tightness, the indoor air is continuously replenished with fresh and conditioned air, reducing the energy losses that typically come from whole house ventilation. This is accomplished by the use of a standard Heat Recovery Ventilator (HRV) or optional Energy Recovery Ventilator (ERV) with adjustable humidification and dehumidification controls. 

Regardless of which ventilation system is chosen, Unity homes come standard with air-source heat pumps (for heating and cooling). When properly installed, an air-source heat pump can deliver one-and-a-half to three times more heat energy to a home than the electrical energy it consumes, according to the U.S. Department of Energy.  This technology loses less humidity in the winter than with forced hot air/furnace systems that scorch the air at high temperature—driving off its moisture—making an outboard humidifier consume more energy to replenish it. Finally through filtration, allergens and other pollutants can be removed, making indoor air considerably healthier than outside air.

Why build tight houses that require sophisticated ventilation systems, you ask? There are many myths held by the public (and by many builders as well) surrounding the false notion that houses need to breathe. This bogus theory holds that houses can be too tight and that air leakage or “natural ventilation” dries everything out and keeps the air quality healthy. But as Green Building Advisor.com points out, “…air leaks mean you’ve lost control of air movement…air and moisture can be forced into wall and ceiling cavities where water vapor condenses and fosters the growth of mold.”

Additionally, according to Green Building Advisor.com,

“Warm air exiting the top of the house can draw in cold air to replace it, wasting heat and energy. In many ways, uncontrolled air movement wastes energy and increases the risk of long-term damage to building components. Effective air and moisture barriers reduce those problems, but they come with a few caveats: Tight houses need mechanical ventilation to ensure a supply of fresh air to keep people healthy.”

a Unity Homes Xyla 212

Artist’s rendering of a Xyla 212.

And while we’re on the subject, what exactly is “fresh air?” Most would assume outside air is fresh air, but whether you live in the city or the country, outdoor air carries pollutants in the form of gasses, droplets, and particles. This includes pollution from cars, trucks, airplanes, industry, tractors plowing fields, wood and crop fires, ground level ozone, and allergens like pollen. Indoor air, too, can contain a host of pollutants from combustion sources like stoves and furnaces, to high VOC building materials and furnishings, to household cleaning products and radon, to name a few. All of these pollution sources can cause health problems if not mitigated through green building practices and sophisticated air handling technology.

Unity Homes, and other quality high-performance homes, help you breathe easier and live healthier by using only green materials and finishes, by sealing out unwanted moisture, dirt, dust, insects and allergens that can lead to health problems and costly repairs, and by conditioning and filtering incoming air. At the same time, Unity’s well insulated and tight building envelope reduces overall heating and cooling costs, and adds comfort by eliminating drafts and temperature variations.

Moreover, while a Unity Home conditions your indoor air, its low-waste, precision offsite fabrication and super-efficient energy performance thereafter works to lower its impact on the outside air—which we all share—as well.

xyla 212 under construction

A Unity Homes Xyla 212 under construction in Vermont.

Our newest Unity, a Xyla 212 with an ERV in Montpelier, Vermont will be featured in our next newsletter.

Read more about what steps to take both to reduce the risk from existing sources of indoor air pollution and how to prevent new problems from occurring in EPA’s “Care For Your Air: A Guide to Indoor Air Quality.

*Source: http://minkukel.com/visualize-it/every-breath-you-take/

 

 

 

Project Update: A Solar Studio

studio-001When Keene, New Hampshire photographer Steve Holmes wanted a studio space, he was driven by a lifestyle decision to connect his business to family and home. He also wanted more touch points for an enhanced client experience, where they could initially meet Steve, discuss the shoot, be photographed, then review the finished work.

studio-003Holmes, who specializes in portrait and wedding photography, came to Bensonwood through a recommendation from a friend for whom we recently built a home in Idaho. Holmes knew what he wanted for his studio and provided Bensonwood architect Randall Walter with Adobe Illustrator sketches of his ideas.

The Holmes Studio as completed complements the local vernacular; the exterior is a traditional shed-barn design, while the interior has a clean, contemporary look with a more refined feel. It features high ceilings to accommodate professional lighting and ample windows to allow plenty of soft, natural light from the north side into the studio space.

studio-002The versatile 1,224 square foot space features a covered porch and a greeting room to meet with clients and show them portraits, a bathroom, dressing room, workshop and storage space. A large, rigid projection screen on the back of the massive sliding, barn-style door dividing the office and studio spaces was Steve’s idea, which woodworking team leader Kevin Bittender made a reality in Douglas fir, customized with Better Barns hardware and a low-VOC finistudio-005sh.studio-004

Because of his engagement in the process, Steve found the design-build process very enjoyable. He especially likes the feature of the 3,000 pound single beam that spans the length of the building, adding a subtle nod to the rustic New England vernacular and balancing the contemporary interior design with the heavy timbers for which Bensonwood is so well known.

Solar SourceIMG_4837 in Keene, New Hampshire supplied the grid-tied photovoltaic system that, over a year, produces more electricity than the studio needs. Holmes says he really enjoys watching his electric meter spin backwards as the 13.85 kW solar electric system feeds energy back to the utility.IMG_4838